NetGain Hyper Drive SME AC-X144

Equipped with the latest in power electronics technology, our HyPer-Drive X144™ controller can control SRIPM motors in a wide range of applications up to 85 kW peak power. The X1 is the only controller capable of driving the SRIPM technology in our HyPer 9HV™ motor. The X144 can also be configured to control most AC induction motors and permanent magnet motors!

This compact unit has two functions:

The controller is

we call the low-voltage logic module the controller. The K1 wiring harness receives and transmits data for throttle, brake, direction, power limit, rotor position, etc. For more information on features and specifications, see Technical Manual X144. HyPer 9HV™ System User Manual for default wiring and programming.

The inverter is

We refer to the high voltage power module as an inverter. The DC power supply is connected to the B+ and B- terminals, where it is inverted into 3-phase AC for the U, V and W terminals to drive the HyPer motor. This inverter can also be programmed as a slave to an external control unit, which takes over from the controller's logic module.

DC supply voltage from 90V to 180V and current up to 500A peakUp to 50% higher power density than direct competitors (more power in half the footprint).
Field-oriented control algorithm optimized specifically for synchronous motors with internal permanent magnets.
Fully customizable I/O.
IP65 protection - robust and reliable.
Extensive program configuration options from a PC using Smartview software.
Optional liquid cooling

‍