NetGain Hyper Drive SME AC-X1

Equipped with the latest power electronics technology, our HyPer-Drive X1™ controller can control SRIPM motors in a wide range of applications with peak power up to 85 kW. The X1 is the only controller capable of driving the SRIPM technology in our HyPer 9™ motor. X1 can also be configured to control most AC induction motors and permanent magnet motors.

This compact device has two functions:

controller -.

We call the controller a low-voltage logic module. The K1 wiring harness receives and transmits data for throttle, brake, direction, power limits, rotor position, etc. For more information on features and specifications, see the X1 Technical Manual. HyPer 9™ System User Manual for connection and default programming.

The inverter is

We refer to the high-voltage power module as an inverter. The DC power supply is connected to the B+ and B- terminals, where it is inverted into 3-phase AC for the U, V and W terminals to drive the HyPer motor. This inverter can also be programmed as a slave to an external control unit that takes over from the controller's logic module.

DC supply voltage from 62V to 130V and current up to 750A peak

Up to 50% higher specific power than direct competitors (more power on half the area)

Field-oriented control algorithm optimized specifically for synchronous motors with internal permanent magnets

Fully customizable inputs/outputs

IP65 protection - robust and reliable

Extensive program configuration options from a PC using the Smartview software

Additional liquid cooling

• The harness and display are sold separately.

Maximum current: 750 Amps with liquid cooling (maximum 2 minutes)

Rated power: 38 kW

Input voltage: 62-132 V

Length: 210 mm

Width: 160 mm

Height: 80 mm

Weight: 9 lbs.

Precharge circuit: Built-in

Computer interface: DB9 serial port

Data logging capabilities: Yes

Tachometer output: Yes, via CAN bus

Firmware update: Yes

Internal contactor: No

Thermal deratization: Yes

Possibility of reversal: Yes

Adjustable acceleration (rotational speed): Yes

Programmable inputs: Yes

Programmable outputs: Yes

Size of the terminal stud: M8

Rotational speed sensor: Internal

Maximum efficiency: 92

Thermal cooling: [Yes, cooling plate sold separately]

Warranty period: 1 year

‍