Victron Energy Phoenix Inverter 48/250 VE.Direct Schuko

Phoenix Inverter Smart is an efficient and reliable inverter that allows you to power household equipment requiring 230V/120V AC from "household" or "car" batteries with a voltage of 12V, 24V or 48V DC.

Features:

VE.Direct communication port

You can connect to the VE.Direct port:

• Computer (requires VE.Direct to USB interface cable)
• Apple and Android smartphones, tablets, MacBooks, and other devices (requires VE.Direct Bluetooth Smart Key)

Fully customizable

• Disable low battery alarm and reset levels
• Low battery shutdown and restart levels
• Dynamic tripping: load-dependent tripping level
• Output voltage: 210 - 245 В
• Frequency: 50 Hz or 60 Hz
• Enable/disable the economy mode and the level of sensation of the economy mode

Monitoring

• Input and output voltage, % load and alarms

Proven reliability

• The full bridge plus toroidal transformer topology has proven its reliability over the years. The inverters are short-circuit resistant and protected against overheating, both due to overload and high ambient temperatures.

High starting power

• Required to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

• In ECO mode, the inverter goes into standby mode when the load drops below a set value (minimum load: 15 W). After entering the standby mode, the inverter turns on for a short period of time (configurable, default: every 2.5 seconds). If the load exceeds the set level, the inverter will remain on.

Remote switching on/off

• The remote switch can be connected to the two-pole connector or between the battery positive and the left contact of the two-pole connector.

DC connection with screw terminals

• No special tools are required for installation.

These inverters allow powerful devices requiring AC power to operate with DC power sources, ensuring reliability and efficiency in a variety of environments.

‍