Victron BlueSolar MPPT 250/100-Tr VE.Can

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from the solar panel into energy that optimally charges the battery.

Victron SmartSolar MPPT 250/100-Tr VE.Can

The SmartSolar charge controller can charge even severely discharged batteries. It can operate with battery voltages as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.

Features:

• MPPT: Ultra-fast maximum power point tracking. By continuously monitoring the voltage and current output of your solar panels, MPPT technology ensures that every drop of available power is flushed from your panels and harvested for storage. The advantage of this technology is most noticeable when the sky is partially cloudy and the light intensity is constantly changing.
• Remote monitoring and control. Remotely control and monitor the extensive capabilities of the SmartSolar MPPT charger using its built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) gives you access to the full power of your MPPT anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even if there is no internet connection nearby - you can control your MPPT by connecting a GlobalLink 520.
• Additional serial connection modules. The VE.Can SmartSolar charger is equipped with CAN bus ports, which allows communication with additional VE.Can SmartSolar chargers. Additional devices are simply connected to each other using a single RJ45 cable between the individual devices. When connected to each other, all individual VE.Can SmartSolar chargers synchronize their charge stages. They can also transmit their data via a single cable to the GX monitoring device.
• SmartSolar control display. The SmartSolar MPPT 250/100-Tr VE.Can charger also features a VE.Direct port, just like our other MPPT solar chargers. This port can be used to monitor a single device or to control street lights. The remote on/off connector can be controlled from the outside using a third-party device, such as a lithium battery. An optional plug-in LCD display/control provides real-time data display, configuration, and control directly from the front panel of the unit.