Dual Hall Effect Throttle With Lever

Double Hall effect throttle with lever

It uses a high-quality double Hall-effect throttle sensor with IP67 protection. The entire throttle body is made of black anodized aluminum, with sealed ball bearings and mechanical stops, as well as an internal return spring.

This throttle pedal assembly is ideal for electric vehicle conversions, kit cars, marine applications, pedal boxes or any other application where the original throttle cannot be used, so it is suitable for replacing the throttle of gasoline and diesel vehicles.The throttle sensor has a two-channel configuration for controllers that require two throttle signals, but can also operate with a single signal.

Environmental specifications
-Vibration 15g sinusoidal, 9.26g RMS axial; 40Hz - 2kHz all 3 axes
-Operating temperature -40°C to 125°C (-40°F to 257°F)
-Storage temperature -40°C to 150°C (-40°F to 302°F)
-Protection against dust and moisture IP67.‍

Electrical Specifications
- Input voltage 5.0 VDC ± 10%.
- Output voltage 10% to 90% of input voltage (see voltage vs. angle graph)
- Input current 14 mA typ., 16 mA max.
-Output current from -8 mA to 8 mA output
- Error ±3.5
- Output linearity ±3.5%.
- Maximum overvoltage 16 VDC, absolute maximum
- Output current ±30 mA
- Output type Analog

‍