CCS Type2 Fast Charging Kit

The kit contains:

• CCS Type2 socket with 3 meter tails.
• CCS controller
• Two contactors
• Connectors and pins for connecting your own loom.
• CCS VCU.
• Indicator lamp with off button.
• Charging port locking electromagnet.

Our CCS controller is designed to be installed in a high-voltage battery pack together with two contactors, it can also control the main high-voltage contactors and pre-charging.
The kit has been fully tested in the field and meets all CCS charging standards.

The installation and configuration guide can be found in the Documents tab.

Conversion for Porsche 911
52.8 kWh Battery
350 V Rated voltage

Charging from the AC mains type 2:

Using Elcon's 6.6 kW on-board charger, charging at 6 kW to account for efficiency and losses.
Charge from 10-90% SOC: 42.2 kWh
Time required to charge: 7 hours

Fast DC charging:.

Based on battery voltage, theoretical maximum charge capacity: 70 kW
Charge from 10-90% SOC: 42.2 kWh
Time required to charge: 36 minutes.
Based on ideal operating conditions. Actual performance may vary slightly.
Trip example
280-mile trip from London to Newcastle.
Start at 100% SOC, end at 10% SOC.
Consumption: 250 Wh/m
Charging on AC type 2
10 hours charging + 5 hours 30 minutes travel time = 15 hours 30 minutes total trip time = not practical

Fast DC charging:

50 minutes of charging + 5 hours and 30 minutes of travel time = 6 hours and 20 minutes of total travel time.

‍